A boat maintenance schedule sorts the jobs by when they come round: every trip, every 100 hours or year, every few seasons, and the items that expire by date. The intervals below come from the sources on our findings pages: Power & Motoryacht for the engine, Dexter and Discover Boating for the trailer, and the makers and regulators for the safety gear. Your engine's owner's manual overrides any of them.
The checklist, section by section
Every trip
The quick checks. Dexter puts trailer tyre pressure and condition among its most frequent checks, and Discover Boating says to check the trailer lights at every hook-up.
- Trailer tyre pressure to the sidewall figure, sidewalls free of cracks and bulges
- Trailer lights working with the tow vehicle
- Bilge dry, bilge pump working on its float switch
- Life jackets aboard for everyone, flares and extinguishers in date
Every 3 months or 3,000 miles
Dexter's trailer maintenance schedule has wheel nuts and bolts tightened to torque at this interval.
- Trailer wheel nuts torqued to the axle maker's figure
Every 100 hours or every year
Power & Motoryacht gives gear oil every 100 hours or at lay-up, and notes some makers, Yamaha among them, set the water pump impeller at the same interval. The engine's owner's manual sets the figures for your engine.
- Lower unit gear oil changed; grey oil means metal, milky oil means water
- Water pump impeller, at the maker's interval (BoatUS says every other year is often about right)
- Fuel filter and water separator
- Anodes replaced when half gone, or at least once a year (Martyr Anodes)
- Trailer bearings cleaned, inspected and repacked, and springs checked for loss of arch (Dexter, 12 months or 12,000 miles)
- Compression test at lay-up (Power & Motoryacht)
Every few seasons
Longer intervals for the rig, the trailer and the safety gear.
- Trailer bearings repacked every three to five seasons where bearing protectors are fitted (Discover Boating)
- Professional rig inspection every three years (Yachting Monthly)
- Inflatable life jacket parts replaced at least every three years, or to the maker's instructions (Transport Canada)
- Life raft serviced to the maker's schedule; ISO 9650-1 allows up to three years between services (Practical Sailor)
By date
These expire or age out whatever the hours. Write each date down when the item is bought.
- Pyrotechnic flares, 42 months from manufacture (Rutgers Cooperative Extension, on the US rule)
- Disposable fire extinguishers, out of service at the end of their 12th year in US waters (US Coast Guard)
- Trailer tyres, a candidate for replacement past five years (Dexter) and replaced past six (NTSB, via Discover Boating)
- AGM batteries, 5 to 8 years (Lifeline)
- Standing rigging, every 10 years as insurers generally recommend (Yachting Monthly)
Work done
Record each job on the day, with the engine hours. The maintenance log template has the full record a buyer's surveyor asks to see.
- Date and engine hours
- Job and parts used
- Done by
- Next due (date or hours)
Keep the record
A schedule says what's due; the boat maintenance log records what was done, with the engine hours. Buyers' surveyors ask for it, and InTheBite's Capt. Adam Peeples says documentation goes a long way in giving buyers confidence in a higher-hours engine. See how long outboard motors last.
The reasons behind the dates
Each interval has its own page: impellers, anodes, flares, fire extinguishers, batteries, standing rigging, trailer tyres and trailer springs and bearings. The how long boat parts last table puts them side by side.
For surveyors
A schedule that's been kept tells you more than the hour meter. With Axsail, say "gear oil and impeller records at 100 hour intervals to 600 hours" as you go through the owner's papers, and it goes into the engine section of the report.