Axsail
FINDINGS LIBRARY · HULL AND STRUCTURE

How long does gelcoat last? Oxidation, chalking, when to paint and how surveyors write it up

UPDATED 14 NOVEMBER 2026 · 3 EXAMPLE FINDINGS · 5 SOURCES

How long gelcoat lasts, how UV turns it chalky, how long wax, restorers and paint last, when painting is the answer and example findings graded A, B and C.

AT A GLANCE
Oxidised gelcoat
USUAL GRADE
C for oxidation and chalking on sound gelcoat. B where compounding has worn through to the laminate or the deck has lost its nonskid. A only when the surface hides a defect that needs opening up
FOUND WITH
Wiping a hand along the topsides for chalk, then looking at gloss, colour, edges and nonskid in low, raking light
JUDGED AGAINST
Surveyor David Pascoe notes many gelcoats fade and chalk after only a few years, and that painting is the only practical answer for poor ones. Practical Sailor says UV inhibitors only delay the decline
REPAIR COST
Compounding and wax for oxidation. Pascoe says about 75 percent of the cost of painting is preparation

Gelcoat is the shine buyers fall for and the first thing the sun takes. On survey, oxidation is usually cosmetic. What matters is how much gelcoat is left after years of compounding, and whether the chalk is hiding cracks.

How long gelcoat lasts

No source gives it a number of years. Quality and exposure decide it.

  • Quality. Surveyor David Pascoe writes that most gelcoats have relatively poor resistance to sunlight, with fading and chalking after only a few years. He also notes a high quality gelcoat, Bertram's for example, could still be buffed out and polished decades on.
  • UV inhibitors. Practical Sailor says modern gelcoats contain fairly effective UV inhibitors, but they only delay the decline, and gelcoat on older boats may have little or none.
  • Where it sits. Practical Sailor notes deck gelcoat has a much harder life, because the horizontal surface takes the sun all day.
  • Colour. Practical Sailor warns that colours other than white fade more than owners expect.

A PCI Magazine study of polyester gelcoats describes the order: the colour changes first, then gloss drops as the surface chalks. It names cure, resin chemistry, hardness and thickness as the factors that decide how fast.

How long the fixes last

Fix How long it lasts Source
Paste wax Reapply at least twice a season Yachting
Wax in Practical Sailor's test Needed another coat after four months Practical Sailor
Acrylic gelcoat restorer Makers recommend recoating after a year, sooner in warm climates Practical Sailor
Paint, done properly Ten years or longer with care; urethane 15 years or more David Pascoe

Practical Sailor adds that restorers are for older, porous gelcoat, at least four years old, and that they can't simply be sanded off later: they have to be removed chemically. That matters if the owner plans to paint.

When painting is the answer

Every compound and polish takes some gelcoat away. Pascoe says that for boats with average or poor gelcoat that oxidises early, painting is the only practical solution, and that preparation is about 75 percent of the cost. Practical Sailor recommends polyurethane for faded, chalky or crazed topsides because of its longevity and resistance to chalking. On decks it warns that painting worn nonskid only makes it more slippery.

How a surveyor checks it

Wipe a hand along the topsides: chalk on the palm is oxidation. Look at the hull in low, raking light for colour patches, and at edges, chines, the sheer and the transom corners, where polishing wears through first. Check the nonskid for grip. Then look past the chalk for crazing and stress cracks, which oxidation can hide.

What decides the grade

Depth, more than shine. Chalk on sound gelcoat is a C. Gelcoat worn through to the laminate, or nonskid gone on a walkway, is a B. It's an A only when the surface hides a defect that needs opening up.

Oxidised gelcoat: example findings

The same defect written up at each grade, the way Axsail writes it from what the surveyor says on board. The grade follows what was found, so use these as wording, then grade what you see.

HULL AND STRUCTUREB
Topsides, port side forward

Gelcoat compounded through to the laminate along the sheer over about 1 m; fibres visible. Dark staining in the exposed area.

Recommendation: Have the exposed laminate sealed and the area checked for moisture before the next season. Consider painting the topsides, as the gelcoat no longer has depth for further compounding.

HULL AND STRUCTUREB
Foredeck nonskid

Nonskid worn smooth and chalky over the foredeck walkway. Footing poor when wet.

Recommendation: Restore the nonskid on the foredeck walkway within 12 months.

HULL AND STRUCTUREC
Topsides, all round

Topsides chalky and dull, colour faded. Chalk wipes off on the hand. No crazing or cracks found.

Recommendation: Compound, polish and wax the topsides, then wax at least once a season.

ASafety. Safety or compliance deficiency. Fix before the vessel is next underway.
B12 months. Deficiency that needs timely attention. Fix within about 12 months.
CRoutine. Note or observation, cosmetic or maintenance. Routine maintenance at the owner's convenience.

Photos to take

The topsides in raking light, the chalk on your hand, any area worn through, and the nonskid close up. With Axsail, say what you see as you photograph it and the finding is written with its grade.

Writing it up

Say where the oxidation is, whether it wipes off as chalk, whether the gelcoat is worn through anywhere, and whether cracks were found under it. Recommend compounding for sound gelcoat and painting where there's no depth left.

Frequently asked

How long does gelcoat last?

No source we found gives gelcoat a life in years, because quality and sun decide it. Surveyor David Pascoe says many gelcoats fade and chalk after only a few years, while a high quality gelcoat can still be buffed out decades on. Practical Sailor notes UV inhibitors in modern gelcoat only delay the decline.

What causes gelcoat oxidation?

UV. Yachting says chalky oxidation fills the gelcoat's microscopic pores and cracks. A PCI Magazine study of polyester gelcoats found the colour changes first, then gloss drops as the surface chalks.

How long does paint last compared with gelcoat?

Pascoe says a good paint job should last ten years or longer with proper care, and that urethane finishes have lasted 15 years or more under the Florida sun. He calls painting the only practical solution for gelcoats that oxidise early.

How long do gelcoat restorers and wax last?

In Practical Sailor's test, the makers recommend recoating restorers after a year, sooner in a warm climate, and wax needed another coat after four months. Yachting advises paste wax at least twice a season.

Your full survey report, minutes after the walk-round

Dictate as you inspect. Axsail builds the findings and the report for your signature

Start free

Related findings

Findings library
HULL AND STRUCTURE

Gelcoat crazing

What gelcoat crazing is, why temperature causes it, how to tell it from stress cracks, why it can't be painted over, and example findings graded A, B, C.

How to find and write it up
HULL AND STRUCTURE

Gelcoat stress cracks

Are spider cracks in gelcoat bad? How a surveyor reads stress cracks at fittings and corners, tells them from laminate damage and grades them A, B or C.

How to find and write it up
HULL AND STRUCTURE

Osmotic blistering

What osmotic blistering is, how a surveyor tells it from paint blisters, which moisture readings matter, what treatment costs per foot and three example findings graded A, B and C.

How to find and write it up
HULL AND STRUCTURE

Wet deck core

How water gets into a cored deck, how a surveyor maps it with a moisture meter and a hammer, which readings to trust, what recoring costs and three example findings graded A, B and C.

How to find and write it up
HULL AND STRUCTURE

Wet transom core

How water gets into a cored transom, how a surveyor finds it with a hammer and a moisture meter, what the sounds and cracks mean, what repair involves and three example findings graded A, B and C.

How to find and write it up
HULL AND STRUCTURE

Gelcoat stress cracks

What star cracks and parallel gelcoat cracks say about a fibreglass boat, how a surveyor tells crazing from structural cracking, what repair involves and three example findings graded A, B and C.

How to find and write it up

Report templates with this finding

FREE TEMPLATE · WORD

Pre-purchase survey

Free Word template for a recreational boat or yacht pre-purchase survey report: each section explained, with example wording and findings graded by urgency.

Open template
FREE TEMPLATE · WORD

Insurance survey

Free Word template for a recreational boat condition and valuation survey report for insurance: each section explained, with the insurer's requirements and the valuation.

Open template
FREE TEMPLATE · WORD

Out of water survey

A free Word template for an out of water boat survey report: the hull below the waterline, moisture readings, running gear and through-hulls, with example wording and example findings graded A, B and C.

Open template

Related guides

YACHT SURVEYS · 7 MIN

Pre-purchase yacht survey: what it covers, how to book one and what to do with the report

What a pre-purchase boat survey covers, from the haul-out to the sea trial, how to choose a SAMS, NAMS, IIMS or YDSA surveyor, the survey contingency in your offer and how to use the report.