UWILD is the US Coast Guard's underwater survey in lieu of drydocking: a diver or ROV examines an inspected vessel's hull afloat, in place of every other drydock examination. For small passenger vessels the rule is 46 CFR 176.615, with a matching rule for larger passenger vessels at 46 CFR 115.615. The Officer in Charge, Marine Inspection (OCMI) approves it.
Drydock intervals it replaces
| Vessel, per 46 CFR 176.600 | Drydock and internal structural exam |
|---|---|
| Salt water more than 3 months in any 12 since the last exam | At least once every two years |
| Salt water 3 months or less in any 12 | At least once every five years |
| International voyages under SOLAS | Every 12 months, unless approved for UWILD |
The OCMI can call a vessel in early after suspected damage, under 176.600(d). Section 176.600(e) points to the alternate hull exam rules in 115.625, which allow fewer alternate exams when the underwater survey is done mainly by an approved ROV than by divers.
Who's eligible
Per 176.615(a), the vessel must be:
| Condition | Under 15 years | 15 years or older |
|---|---|---|
| Approved by | OCMI | District Commander |
| Hull | Steel or aluminium | Steel or aluminium |
| Hull protection | An effective hull protection system | An effective hull protection system |
| Extra condition | None | A complete set of hull gaugings at the previous drydocking, free from appreciable hull deterioration |
What the application must include
Send it to the OCMI at least 90 days before the next required drydock examination, with:
- The procedure for carrying out the survey
- The time and place
- How the diver's or ROV's position on the hull will be found
- How every through-hull fitting and appurtenance will be examined
- The vessel's condition, including the expected draft on the day
- A description of the hull protection system
- The name and qualifications of any third-party examiner
On the day
The CFR text doesn't list survey content beyond the application. Deep Trekker's UWILD guide, written by an ROV maker, gives a working checklist: hull paint and fouling, ports, props (blades, shafts, hubs, seals), stern bearings, rudder bearings, sea suctions and valves, and shell plating. It says the video must clearly show the hull markings, sea chests, inlets and discharges, rudders, pintles and propeller, that the start and end time are documented, and that any corrosion or damage is examined from inside, with thickness testing if the surveyor asks.
For surveyors
A UWILD is approved on the strength of what the surveyor saw and recorded, and on most of them the person on the surface is already narrating. With Axsail the inspector or ROV pilot talks each area through as the camera reaches it, stills go on the right finding, and the draft follows the underwater hull inspection report template. The class and flag version of the same survey is on in-water survey requirements, and the boats it applies to on Certificate of Inspection.