MGN 280 (M) is the MCA guidance note that published the Small Commercial Vessel and Pilot Boat Code, the SCV Code, as its annex. The SCV Code harmonised four earlier codes and let boats coded to them use its standards as an alternative. For new boats it has now been replaced: the Workboat Code Edition 3 supersedes it for workboats and pilot boats, and the Sport or Pleasure Vessel Code replaces it for charter. Boats already certified under it move across at renewal.
What MGN 280 harmonised
The note lists the four codes it brought together, all for vessels under 24 metres load line length:
| Code | Common name |
|---|---|
| The Safety of Small Commercial Motor Vessels | Yellow Code |
| The Safety of Small Commercial Sailing Vessels | Blue Code |
| The Safety of Small Workboats and Pilot Boats | Brown Code |
| Small Vessels in Commercial Use for Sport or Pleasure Operating from a Nominated Departure Point | Red Code |
Boats that used the SCV Code standards were still certificated under their existing code. The note says SCV Code certification itself was for vessels built after new regulations came into force.
The SCV Code's area categories
| Category | SCV Code annex |
|---|---|
| 6 | To sea, within 3 miles of a nominated departure point and never more than 3 miles from land, favourable weather and daylight |
| 5 | To sea, within 20 miles of a nominated departure point, favourable weather and daylight |
| 4 | Up to 20 miles from a safe haven, favourable weather and daylight |
| 3 | Up to 20 miles from a safe haven |
| 2 | Up to 60 miles from a safe haven |
| 1 | Up to 150 miles from a safe haven |
| 0 | Unrestricted |
Category 5 is the one that changed. In the Workboat Code Edition 3 it's within 3 miles of land and of the departure point, in favourable weather. Check which code a certificate was issued under before reading its category.
For multihulls, the SCV Code ties the area to a minimum "bare poles" safe wind speed: 36 knots for areas 0 and 1, 32 for area 2, 28 for area 3, and 25 for areas 4 to 6.
What replaced it
- Workboats and pilot boats. The Workboat Code Edition 3 says it supersedes MGN 280 for small workboats and pilot boats, along with Edition 2 and the original workboat code. Existing boats meet it by their next renewal or three years after it came into force, whichever is later.
- Sport or pleasure. GOV.UK says boats certificated under the Blue, Yellow or Red Codes or the MGN 280 equivalent must meet the Sport or Pleasure Vessel Code by their next renewal examination or three years after it came into force, whichever is later.
For surveyors
On a boat still certificated under MGN 280, the next renewal is a move to a new code, so the examination covers the new code's requirements. Work from the existing certificate's area category and list what changes. With Axsail, dictate each gap as you find it, "category 5 under MGN 280, new code limits it to 3 miles, owner to confirm intended area", and it becomes a deficiency in the report.