Axsail
VESSEL CODES · UK AND RED ENSIGN

Red Ensign Group Yacht Code Part B: passenger yachts carrying 13 to 36 passengers

UPDATED 17 NOVEMBER 2026 · 2 SOURCES

The Red Ensign Group Yacht Code Part B for passenger yachts with 13 to 36 passengers: scope, PY-1 and PY-2, damage stability and pools on board.

AT A GLANCE
REG Yacht Code Part B
REGULATOR
The Red Ensign Group members, each as flag Administration
APPLIES TO
Pleasure yachts of any size on international voyages carrying more than 12 but not more than 36 passengers, no more than 200 persons in all, and no cargo
SURVEYS AND CERTIFICATE
Passenger Yacht Safety Certificate, recording the subdivision and load line assigned
GET THE TEXT
Free from the Red Ensign Group as a PDF, with annexes shared with Part A

The Red Ensign Group Yacht Code Part B is the code for passenger yachts: yachts on international voyages carrying more than 12 but not more than 36 passengers, with no more than 200 persons on board and no cargo. It covers yachts whatever their size, in private use as well as in trade. Yachts with up to 12 passengers use Part A.

Scope

Part B says existing vessels may elect to be certified under it in the same way as new ones. Any ship converted to a passenger yacht is treated as new from the date the work started. Yachts already certificated under the previous Passenger Yacht Code or the previous revision of Part B stay under the standards in force at their initial survey. A "person" in the code is anyone over the age of one.

Passenger Yacht 1 and Passenger Yacht 2

Category Limits in Part B
Passenger Yacht 1 (PY-1) A prescribed international voyage: no more than 200 nautical miles from a place of safety, within an area that limits the voyage to 1,000 miles from the initial departure point, as stated on the certificate
Passenger Yacht 2 (PY-2) Wind up to Beaufort force 6 and sea state 5, no more than 20 miles from land and 60 miles from a place of safety

Some requirements ease for PY-2. For example, the minimum freeing port area for a forward or after well may be reduced.

Stability

Damage stability is the core difference from Part A. Part B applies its damage stability requirements to all passenger yachts, with the SOLAS 90 deterministic method allowed for vessels up to 80 metres load line length if the Administration agrees. The subdivision and load line assigned are recorded on the Passenger Yacht Safety Certificate.

Pools, spa baths and jacuzzis are part of every loading condition, with the water mass and free surface included:

Stability with pools full What Part B requires
Intact and damage compliance No restriction
Intact only Pools not filled in seagoing conditions, only at anchor or alongside; drain in 10 minutes
Neither Full pools covered in a separate section of the stability booklet with a warning note; drain in 10 minutes

Every pool must be able to drain in bad weather, and limits for partly full pools have to be stated.

For surveyors

On a passenger yacht the stability booklet and the certificate carry the limits you're checking against: the persons limit with the PY category, and the pool conditions. Record those first, then work through the yacht. With Axsail, say "PY-2, 36 passengers, jacuzzi drain valve seized" and it's filed with its photo for the new build survey report or your own report form.

Frequently asked

What does Part B of the Red Ensign Yacht Code cover?

Per Part B, pleasure yachts engaged on international voyages carrying more than 12 but not more than 36 passengers, with no more than 200 persons on board and no cargo. Size is no bar, and it covers private use as well as trade.

What is the difference between Passenger Yacht 1 and Passenger Yacht 2?

Part B defines Passenger Yacht 1 as a passenger yacht on a prescribed international voyage: within 200 nautical miles of a place of safety and 1,000 miles of the point of departure. Passenger Yacht 2 is limited to Beaufort wind force 6 and sea state 5, within 20 miles of land and 60 miles of a place of safety.

Can a passenger yacht sail with the pool full?

Only if the stability booklet shows compliance with the pool full. Part B says a yacht meeting intact stability only must not fill pools, spa baths or jacuzzis in seagoing conditions, and every pool needs drainage for bad weather.

Which damage stability method applies under Part B?

Part B applies the damage stability requirements of its stability chapter to all ships, and lets the Administration accept the SOLAS 90 deterministic method instead for vessels up to 80 metres load line length.

Your coding survey report, minutes after the walk-round

Dictate as you inspect. Axsail builds the findings and the report for your signature

Start free

More vessel codes

All vessel codes
UK AND RED ENSIGN

REG Yacht Code Part A

The Red Ensign Group Yacht Code Part A for commercial yachts of 24 m and over with up to 12 passengers: its scope and the Short Range Yacht rules.

Read the code
UK AND RED ENSIGN

UK small commercial vessel codes

The UK small commercial vessel codes in one place: which boats need one, sport or pleasure versus workboat, the certificate and coding outside the UK.

Read the code
UK AND RED ENSIGN

Workboat Code Edition 3

The MCA Workboat Code Edition 3 for small UK workboats and pilot boats: who it covers, area categories 0 to 6, the examination cycle and the SWB2.

Read the code
UK AND RED ENSIGN

MCA coding

How MCA coding works for a small UK commercial boat: certifying authority, SCV1 or SWB1 application, compliance examination and the SCV2 or SWB2.

Read the code
UK AND RED ENSIGN

Cayman Islands commercial yachts

What the Cayman Islands Shipping Registry requires before a yacht charters: the code for its length, crew rules and the limits on extra guests at events.

Read the code
UK AND RED ENSIGN

Inland Waters Small Passenger Boat Code

The Inland Waters Small Passenger Boat Code for UK passenger boats that don't go to sea: who it covers, Category A to D waters and equipment by category.

Read the code

Report templates

FREE TEMPLATE · WORD

New build survey

A free Word template for a new build or build stage survey report: progress against the specification, inspection by stage, compliance, the punch list and acceptance trials, with example findings graded A, B and C.

Open template