Enter the boat's dry weight, the engines, the fuel and water on board, the gear and the trailer. The calculator adds them up for the total towing weight and gives the tongue weight range on the ball.
Where the numbers come from
| Item | Where to find it |
|---|---|
| Boat dry weight | The builder's spec sheet; Sportsman Boats notes it leaves out motors, fuel and fluids |
| Engines | The engine maker's spec, per engine |
| Fuel | 6.1 lb per gallon gasoline, 7.2 lb diesel, as Boating Magazine uses them |
| Fresh water | About 8.5 lb per gallon, Sportsman Boats |
| Gear | Your own estimate, or weigh it |
| Trailer | The trailer maker, or a weighbridge ticket |
In metric the calculator converts with NIST's 3.785 litres to the US gallon. Sportsman's worked example: a 100 gallon fuel tank and a 20 gallon water tank add roughly 770 lb before anyone steps aboard.
For the engine's own weight, the outboard motor weight chart lists each maker's dry figure by horsepower.
Tongue weight
MasterCraft sets tongue weight at 5% to 10% of everything on the trailer. Its example: for 3,000 lb of trailer, boat and gear, no more than 300 lb and no less than 150 lb on the ball. MasterCraft also says to check the tow vehicle's owner's manual before the first tow.
Check it on a scale
A calculator is only as good as the spec sheets. The sure figure comes from a public weighbridge with the rig loaded the way you tow it. Then check the total against the trailer's capacity sticker and go through the boat trailer inspection checklist for tyres, bearings, brakes and lights.