An outboard takes from about 0.35 litres of engine oil at 2.5 hp to around 8 litres at 300 hp and above. A 9.9 hp four-stroke holds 0.8 to 1.0 litre, a 115 around 3 to 5.5 litres and a V6 from 6.3 to 8 litres. The chart sets each maker's published figure side by side, from Yamaha's, Suzuki's and Tohatsu's spec sheets and Mercury's V6 and V8 manual.
Engine oil capacity by horsepower
Litres. Yamaha's figure is with a filter change, and Tohatsu marks its bigger engines "w/filter". Suzuki gives one oil pan capacity without saying. Mercury's Pansar-published specifications don't include oil, so only the V6 and V8 from Mercury's manual appear.
| hp | Yamaha | Suzuki | Tohatsu | Mercury |
|---|---|---|---|---|
| 2.5 | 0.35 | 0.38 | 0.3 | - |
| 4 to 6 | 0.6 | 0.7 | 0.45 | - |
| 8 to 9.9 | 0.8 | 0.8 (DF9.9A), 1.0 (DF9.9B) | 0.8 (CY), 1.0 (E) | - |
| 15 to 20 | 1.8 (F15), 1.1 (F20) | 1.0 | 1.0 | - |
| 25 to 30 | 1.1 (F25), 1.7 (F30) | 1.5 | 1.7 | - |
| 40 to 60 | 1.7 (F40), 2.1 (F50, F60) | 2.7 | 2.4 (MFS40A, MFS50A) | - |
| 70 to 100 | 2.1 (F70), 3.2 (F75, F90) | 4.0 | 4.2 | - |
| 115 to 140 | 3.2 | 5.5 | 4.2 | - |
| 150 | 4.5 | 8.0 | 4.2 (MFS150A), 6.7 (BFT150D) | - |
| 175 to 225 | 4.5 (V MAX SHO 175, F200), 6.3 (F225) | 8.0 | 7.8 | 6.6 (V6) |
| 250 to 300 | 6.3 | 8.0 | 7.8 (BFT250D) | 6.6 (V8) |
| 350 | 7.9 | 8.0 (DF350AMD) | - | - |
| 450 | 7.8 (XTO) | - | - | - |
For quarts, multiply by 1.057. The maker pages break these down by model: Yamaha and Suzuki.
Why the same power takes different amounts
Oil capacity follows the engine's size more than its rating. Tohatsu lists its MFS75A to MFS150A all at 1,995 cc and 4.2 litres. Suzuki's 150 hp models have the same 2,867 cc displacement as its DF200A and take 8.0 litres, nearly twice Yamaha's F150 at 4.5.
Gear oil
Spec sheets rarely list the gearcase. Yamaha's owner's manual for the F13.5A and F15A gives hypoid gear oil SAE 90, 250 cm3 (8.45 US oz). Mercury's manual for the V6 and V8 FourStrokes gives two gearcase capacities for each engine, 710 and 810 mL on the V6 and 720 and 680 mL on the V8, depending on the gearcase fitted. Yamaha adds a check at every change: water in the drained oil points to a leaking seal.
For surveyors
Record the oil level, its condition and the last change against the hours, and drain a sample of gear oil if the owner allows. With Axsail, say "gear oil drained, no water, small amount of fine metal on the magnetic plug" and it goes into the engine survey report.